Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trane Air Duct Cleaning in Severance, CO
We provide independent Trane air duct cleaning across Severance, and the one thing that sets our Trane work here apart is what we find inside the ducts: construction debris. Nearly every home in this town went up in the last two decades, so a Trane system in Severance usually means a newer air handler carrying drywall dust, sawdust and builder grit that was never fully cleared. That’s a different job from the decades-of-grime cleaning older housing stock needs.

We’re Trane duct cleaning specialists, not a shop-vac crew, and we bring Rotobrush agitation, Nikro HEPA extraction and Abatement Technologies containment into every Severance home we work in. Call (844) 834-5984 for a free estimate. We answer 24/7.
Why Severance Residents Choose Us for Trane Service
Severance homeowners tend to have done their reading before they call anyone. They’ve seen the “$99 whole-house special” and they know a low teaser price rarely survives the first hour on site. We answer that the same way every time: one flat price per system, agreed in writing before we start, no per-vent pricing, and before-and-after photos of your own ducts so you can see what came out.
Our technicians have up to 12 years of experience working on Trane equipment, and that matters in Severance because the systems here are specific. Trane air handlers in these new-build subdivisions have particular blower and coil layouts, and flex-duct runs with builder-grade supports that fail sooner than the duct itself. We know those layouts from doing the work, not from any manufacturer authorization. We’re independent: not affiliated with, endorsed by or certified by Trane. We repair, install and service Trane systems with quality parts that fit, and we treat the estimate as the number that stands. Insured and bonded. Call (844) 834-5984 to get one.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Trane Air Duct Cleaning Problems We Solve in Severance
These are the Trane problems that come up most often in Severance, and each one has a local cause behind it.
- Construction debris clogging blower wheels and evaporator coils. Trane air handlers that ran during finish work pull drywall dust and sawdust straight into the blower and coil. In brand-new Severance homes this can happen within a year. We extract it with HEPA containment so it doesn’t just get pushed back into the living space.
- Loose or disconnected flex-duct joints. Original flex runs in Severance’s new-build Trane systems often have builder-grade connections that slip or tear. Conditioned air leaks into unconditioned space, and you pay to heat and cool your attic. We test airflow, reseal the joints and repair run by run.
- Return chases drawing in prairie silt. High-plains spring winds push topsoil and fine silt into return ducts. Filters load fast in Severance. We clean the returns and the trunk, not just the registers.
- Condensate problems in Trane air handlers. Dust collects in the drain pan and trap, and the condensate stops draining. Cleaning the coil and pan properly is how you stop the water before it reaches your ceiling.
- Restricted airflow after a dusty finish. A dust-loaded coil and blower choke the system’s capacity even though the equipment is fine. We measure before and after, and we tell you honestly whether cleaning or repair is the right call.
Trane Service in Severance: What Local Conditions Mean for Your Equipment
Here’s what makes Trane service in Severance a different job: almost every home was built in the 2000s or later, so the systems here still have their original flex-duct runs, installed at construction with builder-grade supports and sealants. That pipe and sealant doesn’t age like the duct does. It degrades faster, and it’s the weak link. In recently platted subdivisions around the 80546 area, we find as much work in sealing and repairing those flex runs as in cleaning them, because the Trane air handler runs fine while the ductwork quietly leaks. That’s the opposite of Windsor or Greeley, where older housing stock means decades of buildup is the real problem. If your Trane system is in a Severance home of a few years or a few months, ask us to check the flex joints before you assume the equipment is at fault.
Trane Models & Products We Service in Severance
We service the full range of Trane residential equipment found in Severance homes: XR series air conditioners and heat pumps, XB series furnaces, XV series variable-speed air handlers, and ComfortLink II and XL series communicating systems. Each has its own blower and coil configuration, and each gets the equipment-matched cleaning it needs.
For parts, OEM Trane filters and belts are preferred for fit and warranty compliance. Where a quality aftermarket component meets or exceeds OEM specs, we’ll recommend it and explain why. Repair-versus-replace calls are made honestly, weighing the age of the Trane system against the cost of cleaning or replacement. We’re independent and we don’t push equipment you don’t need.
See the difference
Before
After
Before
After
Before
AfterTrane Service Pricing in Severance
Pricing is set per job by a written estimate after we’ve seen the system, so you’ll know the number before work starts. What drives the cost in Severance is how much construction debris is still in the ducts, how many flex joints need sealing or repair, the size of the Trane air handler and coil, and whether we’re cleaning, repairing or both.

Our scope is three focused services with no creep: Air Duct Cleaning, Dryer Vent Cleaning and Air Duct Repair. A free estimate includes a walkthrough, a look at the Trane air handler and coil, and a video check of the ductwork. Every quote is one flat price per system, with before-and-after photos of your own ducts. Call (844) 834-5984 for a free estimate.
Serving Severance, CO – Our Local Coverage Area
We serve Severance and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Trane Air Duct Cleaning in Severance
Because construction debris is the problem, not age. Trane air handlers in Severance’s new-build homes often ran during finish work without proper filter protection, so drywall dust and sawdust went straight into the blower and coil. A newer system can need cleaning sooner than an older one. Call (844) 834-5984 for a free estimate.
The high-plains winds drive fine topsoil and silt into return ducts. Filters load faster in Severance, and the return chases collect grit that a light cleaning won’t lift. We clean returns and trunk with HEPA extraction so the silt comes out instead of being pushed around. Call (844) 834-5984 to schedule.
We see XV series variable-speed air handlers and XB series furnaces most often in newer Severance builds, along with ComfortLink II and XL communicating systems. We service them all. Model layout isn’t the issue; debris and flex-duct condition usually are. Call (844) 834-5984 for an estimate on your system.
Sometimes, but not always. Uneven airflow in a Trane system can come from a dust-loaded coil, a clogged blower, or a flex-duct joint that’s come loose. Cleaning fixes the first two; the third needs sealing. We test airflow and tell you which one you’re dealing with before you spend anything. Call (844) 834-5984.
Yes, often. Original flex-duct in Severance’s new-build homes relies on builder-grade supports and sealants that degrade faster than the duct, so leaky joints are common. Sealing is worth doing while we’re in the system. One flat price per system, agreed in writing. Call (844) 834-5984 for a free estimate.
It depends on how much construction debris is in the system and how many flex joints need repair, so pricing is set per job by a written estimate after we see it. There’s no per-vent price and no teaser coupon. Call (844) 834-5984 for a free estimate.
Service Areas Near Severance
We serve Severance and the towns around it, including Fort Collins, Timnath, Loveland, Windsor and Wellington. Each has its own housing mix and its own Trane systems, and we work them all with the same equipment and the same one-flat-price-per-system approach. If you’re nearby, call (844) 834-5984 and we’ll confirm.
Book Your Trane Service in Severance Today
If your Trane system is in a newer Severance home, the ductwork may not match the age of the equipment. Let us check. Call (844) 834-5984 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. One flat price per system, agreed before work starts, with before-and-after photos of your own ducts. Insured and bonded.
Written by the team at Duct Cleaning Fort Collins.